Side Airbag

INSTALLATION






1. Install side air bag module on front seat with new torx nuts coated with bonding agent.
2. Secure the side air bag module harness with new harness clips.
3. Install the seat back finisher with screws.
4. Secure the inner cloth which covers the side air bag module and seat back finisher with nuts.
5. Connect side air bag module connector.
6. Install seat back board with new clips.
Ensure harness is not caught between seat back board and seat back.

7. Connect both battery cables.
8. Go to "SRS Operation Check, and perform self-diagnosis to ensure entire SRS operates properly. (Use CONSULT or air bag warning lamp).