Without Scan Tool

HOW TO ERASE SELF-DIAGNOSIS RESULTS
Without CONSULT
After a malfunction is repaired, return from Diagnosis mode to User mode by switching the ignition "OFF" for at least 1 second, then back "ON". At that time, the self-diagnosis result is cleared.

HOW TO CHANGE SELF-DIAGNOSIS MODE
Without CONSULT





From User mode to Diagnosis mode
Diagnosis mode activates only when a malfunction is detected, by pressing the driver's door switch at least 5 times within 7 seconds after turning the ignition "ON". SRS will not enter Diagnosis mode if no malfunction is detected.

From Diagnosis mode to User mode
After a malfunction is repaired, switch the ignition "OFF" for at least 1 second, then back "ON". Diagnosis mode returns to User mode.

If switching from Diagnosis mode to User mode is required while malfunction is being detected, switch the ignition "OFF", then back "ON"and press the driver's door switch at least 5 times within 7 seconds.