Code 0103

COMPONENT DESCRIPTION
The engine coolant temperature sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the ECM. The modified signal returns to the ECM as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.





CONSULT REFERENCE VALUE IN DATA MONITOR MODE
- Specification data are reference values.





ON BOARD DIAGNOSIS LOGIC

DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE

With Consult
(1) Turn ignition switch "ON".
(2) Select "DATA MONITOR" mode with CONSULT.
(3) Wait at least 5 seconds.

OR

With Generic Scan Tool
(1) Turn ignition switch "ON" and wait at least 5 seconds.
(2) Select "MODE 7" with GST.

OR

Without Scan Tool
(1) Turn ignition switch "ON" and wait at least 5 seconds.
(2) Turn ignition switch "OFF", wait at least 5 seconds and then turn "ON".
(3) Perform "Diagnostic Test Mode II (Self-diagnostic results)" with ECM.

EC-ECTS-01 Engine Coolant Temperature Sensor (ECTS) (DTC: P0115):

Engine Coolant Temperature Sensor (ECTS) (DTC: P0115):

DIAGNOSTIC PROCEDURE











COMPONENT INSPECTION
Engine coolant temperature sensor Check resistance as shown in the figure. If NG, replace engine coolant temperature sensor.