Connecting Rod, Engine

NOTE: All specifications are in inches, unless specified otherwise.

Crankshaft:
Standard Journal Diameter:
Main Bearing [05]
Crank Pin [06]
Out Of Round 0.0002
Taper 0.0002

Bearing Clearance:
Main Bearings .0005-.0020
Connecting Rod Bearings .0008-.0026

Connecting Rods:
Pin Bore Diameter .8661-.8666
Side Clearance .0079-.0157

[05] -- Grade 0, 2.5180-2.5183 inch; grade 1, 2.5178-2.5180 inch; grade 2, 2.5176-2.5178 inch; grade 3, 2.5173-2.5176 inch.
[06] -- Grade 0, 2.0460-2.0462 inch; grade 1, 2.0457-2.0460 inch; grade 2, 2.0455-2.0457 inch.