Pinout Values and Diagnostic Parameters

PREPARATION




1. ECM is located behind the center console panel. For this inspection, remove the center console under cover.




2. Remove ECM harness protector.




3. Perform all voltage measurements with the connectors connected. Extend tester probe as shown to perform tests easily.

ECM INSPECTION

ECM Harness Connector Terminal Layout:

Terminals 1 - 14:

Terminals 15 - 29:

Terminals 30 - 47:

Terminals 50 - 72:

Terminals 69 - 103:

Terminals 107 - 124:

Remarks:
- Specification data are reference values, and are measured between each terminal and (25) (ECCS ground) with a voltmeter.