System Description

Operation Flow:

1. Operation flow
*: Indicator blinks when a door, hood , or trunk lid is open.
2. Setting the theft warning system
Setting condition
1. Close all doors.
2. Close hood and trunk lid.
3. Remove ignition key out of key cylinder.

Setting operation
When any of the following operations (a), (b) or (c) is performed, the theft warning indicator lamp will be ON or OFF as shown below.
a. Lock driver's or passenger's door using the key. (All doors are locked by power door lock operation.)
b. Lock all doors using the multi remote control system.
c. Lock one door without using the key with other doors locked

Setting Operation:

3. CANCELING OF THE THEFT WARNING SYSTEM IN THE SET CONDITION
When any of the following operation (a), (b), (c) or (d) is performed, the theft warning is canceled.
a. Unlock driver's or passenger's door using the key.
b. Unlock all doors using the multi remote control system.
c. Insert the ignition key in the key cylinder and turn it to the ACC or ON position.
d. Unlock the trunk lid with the key.
(The theft warning system is temporarily canceled only while the trunk lid is open. After the trunk lid is closed, the system is reset.)
4. CHECK OF THE THEFT WARNING SYSTEM OPERATION
Check if the security indicator is OFF.
When any of the following operation (a) or (b) is performed, system sounds the horns and the theft warning horn and flashes the headlamps for about 2.5 minutes for alert purposes. At the same time, the system disconnects the starter motor circuit.
a. Open the engine hood (trunk lid) using the engine hood (trunk lid) opener.
b. Unlock and open any of the doors without key operation.
5. CANCELING OF THE THEFT WARNING SYSTEM IN OPERATING CONDITION
The theft warning operation can be canceled when any of the following conditions are met.
a. Unlock driver's, passenger's door or trunk using the key.
b. Unlock doors using the multi remote control system.