Connecting Rod: Specifications

NOTE: All specifications are in inches, unless specified otherwise.

Crankshaft:
Standard Journal Diameter:
Main Bearing [01]
Crank Pin [02]
Out Of Round .0002-.0008
Taper .0002-.0008

Bearing Clearance:
Main Bearings .0002-.0020
Connecting Rod Bearings .0008-.0035

Connecting Rods:
Pin Bore Diameter .8661-.8666
Side Clearance .0079-.0200

[01] -- Grade 0, 2.1643-2.1646 inch; grade 1, 2.1641-2.1643 inch; grade 2, 2.1639-2.1641 inch; grade 3, 2.1636-2.1639 inch.
[02] -- Grade 0, 1.8885-1.8887 inch; grade 1, 1.8883-1.8885 inch; grade 2, 1.8880-1.8883 inch.