Final Check

FINAL CHECK
^ Perform FINAL CHECK by the following procedure after repair is completed.
1. Warm up engine. Run the vehicle for at least 20 minutes. Pay attention to engine coolant temperature gauge on the instrument panel. If the reading shows an abnormally high temperature, another part may be malfunctioning.
2. Stop vehicle and let engine idle. Check the intake and exhaust systems for leaks by listening for noise or visually inspecting the components.
3. Allow engine to cool and visually check for oil and coolant leaks. Then, perform "OVERALL FUNCTION CHECK".




MAIN 12 CAUSES OF OVERHEATING
*1: Turn the ignition switch ON.
*2: Engine running at 3,000 rpm for 10 minutes.
*3: Drive at 90 km/h (55MPH) for 30 minutes and then let idle for to minutes.
*4: After 60 minutes of cool down time.