Multi-Remote Switch - Precautions

Classification:
EL95-007

Reference:
ITB95-066

Date:
November 15, 1995

MULTI-REMOTE CONTROL SWITCH PRECAUTIONS

APPLIED VEHICLES:
All 1995-1996 models with Infiniti multi-remote control systems.

SERVICE INFORMATION

Observe the following precautions in the handling of Infiniti multi-remote switches:

1. Use the correct battery for replacement. The correct aftermarket part number for the battery used in all Infiniti remote switches is CR2025. Do not use batteries designated CR2016. These batteries are slightly smaller and will make intermittent contact.

2. Use the correct programming procedure when re-programming, replacing, or adding a multi-remote switch. The procedure for the 130 is slightly different from other Infiniti models. Refer to ITB95-051 (EL95-003) for details.

3. Do not mix multi-remote switches on any individual vehicle. Each new Infiniti vehicle comes with two multi-remote switches, each programmed to that particular vehicle. If you use a multi-remote switch from another vehicle, it will not operate. All of the customer's multi-remote switches, up to four, must be programmed to the vehicle at the same time. This is because the programming procedure erases any previous programs.