RH Turn

When the turn signal switch is moved to the RH position, power is supplied from turn signal switch terminal (2) to
^ front turn signal lamp RH terminal (1)
^ rear combination lamp RH terminal (3)
^ combination meter terminal (32), and
Ground is supplied to the front turn signal lamp RH terminal (2) through body grounds (E10) and (E33).
Ground is supplied to the rear combination lamp RH terminal (4) through body ground (M101) and (M165).
Ground is supplied to combination meter terminal (19) through body grounds (M1) and (M60).
With power and ground supplied, the flasher unit controls the flashing of the RH turn signal lamps.