P0600

A/T Control:

A/T CONTROL (DTC: P0600)
Instead of performing the DTC DETECTING CONDITION, the following method can be used for checking the function of the A/T control function. (The "NG" of this check means the same as the DTC detection.)
1) Turn ignition switch "ON".
2) Start engine.

A/T Control Functional Test:

3) Check voltage between
ECCS Control Module terminal (24) and ground.
ECCS Control Module terminal (29) and ground.
Voltage: Approximately 7V
4) Check voltage between ECCS Control Module terminal (30) and ground.
Voltage: Approximately 0V or 7V