Using Warning Lamp

Using the Warning Lamp To Display Self-Diagnosis Results

Self-diagnosis results can be also read by using the 'AIR BAG"

warning lamp for SRS system except seat belt pre-tensioner.

The warning lamps operate as shown below:

Using Warning Lamp To Display Self-Diagnosis Results:

Problem codes are displayed in present diagnosis mode (self-diagnosis result 1). The problem code last indicated is displayed in initial diagnosis mode (self-diagnosis result 2)

After the malfunctioning parts have been repaired and the system is returned to the user mode, the present diagnosis mode information, displayed as self-diagnosis results, is automatically cleared from memory.

- After repairing malfunctioning part, attempt to clear self-diagnosis results from memory.

- If a malfunctioning part 18 not completely repaired, Information stored in memory will not be cleared.













Self-diagnosis results in present- and initial-diagnosis modes can be identified by number of flashes (d). Refer to, "Warning Lamp Flashing Times and Repair Chart" in regards to failed parts.

Warning Lamp Flashing Times And Repair Chart:

Diagnostic Procedure 1:

Diagnostic Procedure 2:

Diagnostic Procedure 3: