Displaying & Reading Trouble Codes
Self-diagnosisFunction
When a problem occurs in the ABS, the warning lamp on the instrument panel comes on.
Self Diagnosis Procedure:
Self-Diagnosis (Continued):
The warning lamp is also lit by grounding the self-diagnostic (check) terminal located on the check connector to actuate the self-diagnostic results mode. The location of the malfunction is indicated by the warning lamp flashing on the instrument panel.
Code Output Format:
Malfunction Code Chart:
HOW TO READ SELF-DIAGNOSTIC RESULTS (Malfunction codes)
- Determine the code number by counting the number of times the warning amp flashes on and off.
- When several malfunctions occur at one time, up to three code numbers can be stored; the latest malfunction will be indicated first.
- The indication begins with the start code 12. After that a maximum of three code numbers appear in the order of the latest one first. The indication then returns to the start code 12 to repeat (the indication will stay on for five minutes at the most).