Seat - Memory Loss of Set Position

9215infiniti01

Classification: Section:
BF91-011 BODY & FRAME

Reference:
TECHNICAL BULLETIN ITB91-051


Models:
1990 - 1991 Q45

Date:
DECEMBER 12, 1991


SEAT POSITION MEMORY LOSS (ADP)


APPLIED MODEL: 1990 - 1991 Q45 (G50)

APPLIED VIN: From November 30, 1990, beginning with JNKNGO1C*LM108485





SERVICE INFORMATION:

Some customers may complain about an intermittent memory loss of the seat set position which they have programmed into the automatic drive positioner (ADP).

A possible cause may be inadvertent contact with the seat memory switches located on the door panel when exiting the vehicle with the ignition OFF. If the seat memory switch(s) is touched, the ADP will record the current position.





A new ADP control unit is available which incorporates a 0.40 second time delay before recording any inputs from the memory switches. In addition, the new control unit includes a function which will allow the steering column to be adjusted in fixed increments.


PARTS INFORMATION:


DESCRIPTION NEW PART NUMBER FORMER PART NUMBER

ADP CONTROL 98800-60U01 98800-60U00




WARRANTY INFORMATION:

OPERATION OP CODE CS PNC CT FLAT RATE


Rpl. ADP Control Unit RD72AA 4Q 98800 91 0.4 hrs.