Trim Panel: Service and Repair

SIDE AND FLOOR TRIM - Passenger room

CAUTION:

^ Be sure to remove front, center and rear pillar garnishes by pulling them straight out. Use a long-flat-bladed screwdriver when removing metal clips from rear pillar garnish "A".
^ Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
REMOVAL - Body side trim
(1) Remove dash side finisher.
(2) Remove front and rear kicking plates.
(3) Remove front and rear body side welts.
(4) Remove center pillar garnish.
(5) Remove front pillar garnish.
(6) Remove rear wheelhouse garnish.
(7) Remove rear parcel shelf.
(8) Remove rear pillar finisher

REMOVAL - Rear parcel shelf finisher
(1) Remove rear seat cushion. Refer to "SEAT" for details.
(2) Remove rear seatback. Refer to "SEAT" for details.
(3) Remove high-mount stop lamp assembly. (Not equipped with rear air spoiler model)
(4) Remove rear parcel shelf finisher.