Disassembly and Assembly

Fig. 6 Steering Column Exploded View.:

Fig. 10 Removing Combination Switch:

Fig. 12 Upper Column Snap Ring Installation:

Fig. 13 Steering Lock Replacement:

Refer to Fig. 6, for steering column disassembly and assembly procedures, noting the following:
1. Unlock steering column when disassembling and assembling.
2. To remove combination switch, insert suitable tool between mating surfaces Fig. 10.
3. Install snap ring on upper shaft using a suitable tool, Fig. 12.
4. To remove steering lock drill out self shear screws. Replace with new self shear screw heads, Fig. 13.