Passenger Side (# 1, # 3, & # 5)

1. Tie wrap the connector area of # 1 and # 3 injector connectors to the EGI harness.

NOTE:
If installed, # 1 and # 3 injector sub-harnesses must be routed behind (the rocker side) and from the bottom of the EGI harness.

2. Route # 5 injector harness below the PCV hose and tie wrap to the EGI harness.

3. When all harness connections have been made, the harness should look like this. Make sure the harness is not pinched and does not come in contact with any sharp objects.