Rear Output Shaft Seal Replacement

Rear Output Shaft Seal Replacement

Tools Required

J 45756 Rear Output Shaft Seal Installer

Removal Procedure




1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the rear propeller shaft. Refer to Rear Propeller Shaft Replacement (Rear Propeller Shaft Replacement).
3. Remove the rear output shaft seal by prying it out with a flat-tipped screwdriver.

Installation Procedure




1. Using J 45756 , install a NEW front output shaft seal.
2. Install the rear propeller shaft. Refer to Rear Propeller Shaft Replacement (Rear Propeller Shaft Replacement).
3. Check the fluid level. Add fluid, if necessary.
4. Lower the vehicle.