Front Axle Vent Hose Connector Replacement

Front Axle Vent Hose Connector Replacement

Removal Procedure

1. Raise the vehicle. Refer Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement (Service and Repair).




3. Disconnect the vent hose from the vent hose connector.




4. Remove the vent hose connector.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the vent hose connector.

Tighten the vent hose connector to 20 Nm (15 lb ft).




2. Connect the vent hose to the vent hose connector.
3. Install the engine protection shield. Refer to Engine Protection Shield Replacement (Service and Repair).
4. Lower the vehicle.