Oil Level Sensor: Service and Repair

Engine Oil Level Sensor and/or Switch Replacement

Removal Procedure




1. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement (Service and Repair).
2. Disconnect the oil level sensor electrical connector (6).




3. Remove the oil level sensor from the oil pan.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the oil level sensor to the oil pan.

Tighten the oil level sensor to 13 Nm (115 lb in).




2. Connect the oil level sensor electrical connector (6).
3. Fill the engine oil. Refer to Engine Oil and Oil Filter Replacement (Service and Repair).