Front Fender Liner: Service and Repair

Wheelhouse Panel Replacement

Removal Procedure

1. Remove the wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).
2. Remove the right side air temperature sensors.




3. Remove push-in retainers (1).
4. Remove the wheelhouse panel.
5. Remove the 2 bolts and 3 screws.

Installation Procedure




1. Align the wheelhouse panel to the wheelhouse.
2. Install the right side air temperature sensors.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Tighten the 2 bolts and 3 screws.

Tighten the 2 bolts and 3 screws to 2 Nm (18 lb in).

4. Install push-in retainers (1).
5. Install the wheel. Refer to Tire and Wheel Removal and Installation (Service and Repair).