Front Axle Vent Hose Connector Replacement

Front Axle Vent Hose Connector Replacement

Removal Procedure

1. Raise the vehicle. Refer Lifting and Jacking the Vehicle (Maintenance) .
2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement (Service and Repair) .




3. Disconnect the vent hose from the vent hose connector.




4. Remove the vent hose connector.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the vent hose connector.

Tighten the vent hose connector to 20 N.m (15 lb ft).





2. Connect the vent hose to the vent hose connector.
3. Install the engine protection shield. Refer to Engine Protection Shield Replacement (Service and Repair) .
4. Lower the vehicle.