Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Hummer >> 2008 >> H2 V8-6.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Range Selector Lever Cable Replacement

Range Selector Lever Cable Replacement



Range Selector Lever Cable Replacement

Removal Procedure

1. Position the transmission shift control lever to the park position.
2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Maintenance) .
3. Ensure the transmission range selector lever is positioned to mechanical park.




4. Remove the range selector cable retaining clip (2).
5. Remove the range selector cable (3) from the range selector cable bracket (1) at the transmission.
6. Remove the range selector cable (3) from the transmission range selector lever ball stud (4).
7. Lower the vehicle and ensure that the shift lever is still in the park position.




8. Remove the console. Refer to Front Floor Console Replacement (Front Floor Console Replacement) .
9. Remove the range selector cable end (2) from the transmission shift control lever ball stud.
10. Remove the range selector cable (1) from the transmission shift control lever housing.




11. Remove the range selector cable grommet (1) from the floor panel.
12. Remove the range selector cable from the vehicle.



Installation Procedure

1. Route the range selector cable through the hole in the floor panel.
2. Ensure that the transmission shift control lever is in the park position.




3. Install the range selector cable grommet (1) to the floor panel.




4. Install the range selector cable (1) to the transmission shift control lever housing.
5. Install the range selector cable end (2) to the transmission shift control lever ball stud.
6. Install the console. Refer to Front Floor Console Replacement (Front Floor Console Replacement) .
7. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Maintenance) .
8. Ensure that the transmission range selector lever is in the mechanical park position.




9. Install the range selector cable (3) into the range selector cable bracket (1) at the transmission.
10. Install the range selector cable retaining clip (2).
11. Install the range selector cable (3) to the transmission range selector lever ball stud (4).
12. Lower the vehicle.


pro multis · About Operation CHARM