Air Conditioning (A/C) Low Pressure Switch Replacement

Air Conditioning (A/C) Low Pressure Switch Replacement

Removal Procedure

1. Disconnect the electrical connector from the A/C low pressure switch.




2. Remove the A/C low pressure switch from the accumulator.
3. Remove the O-ring and discard.



Installation Procedure

1. Install the NEW O-ring seal to the switch. Refer to O-Ring Replacement (O-Ring Replacement) .





Notice: Refer to Fastener Notice .

2. Install the A/C low pressure switch to the accumulator.

Tighten the switch to 6 N.m (53 lb in).

3. Connect the electrical connector to the A/C low pressure switch.