Instrument Panel Module Replacement

INFLATABLE RESTRAINT INSTRUMENT PANEL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Remove trim panel replacement-I/P accessory right- from the I/P substraight (1).
2. Disable the SIR system (2). Refer to SIR Disabling and Enabling Zones.

CAUTION:
- Refer to SIR Caution in Service Precautions.
- Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.




3. Remove the connector from the I/P.




4. Remove the inflatable restraint I/P module retaining bolts.
5. Ensure that you keep a firm hold on the I/P module.

INSTALLATION PROCEDURE




1. Install the inflatable restraint I/P module (1) to the mounting bracket through the front of the instrument panel.
2. Install the fasteners (2) to the inflatable restraint I/P module.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the fasteners to 10 N.m (89 lb in).

3. Enable the SIR system. Refer to SIR Disabling and Enabling Zones.
4. Install the yellow connector to the I/P.
5. Install the trim panel to the substraight.