Heater Hose Replacement - Inlet
HEATER HOSE REPLACEMENT - INLETTOOLS REQUIRED
J 43181 Quick Connect Connector Removal Tool
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Using the J43181 disconnect the inlet heater hose from the heater core.
2.1. Install the J43181 to the inlet heater core pipe.
2.2. Close the tool around the inlet heater core pipe.
2.3. Firmly pull the tool into the quick connect end of the heater hose.
2.4. Firmly grasp the heater hose. Pull the heater hose forward in order to disengage the hose from the heater core.
3. Remove the heater inlet hose (1) from the mounting clip (2).
4. Reposition the heater inlet hose clamp from the engine.
5. Remove the heater inlet hose (1) from the engine.
6. Remove the heater inlet hose (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the heater inlet hose (1) to the vehicle.
2. Install the heater inlet hose (1) to the engine.
3. Install the heater inlet hose clamp to the engine.
4. Install the heater inlet hose (1) to the mounting clip (2).
5. Connect the heater inlet hose to the heater core.
IMPORTANT: Firmly push the quick connect onto the heater core pipe until you hear an audible click.
6. Pull the heater inlet hose to ensure the connection.
7. Fill the cooling system. Refer to Draining and Filing Cooling System.