Instrument Panel Extension Trim Plate Replacement

Instrument Panel Extension Trim Plate Replacement

Removal Procedure

1. Loosen and move center console reward for access to the I/P extension trim plate. Refer to Console Replacement (Console Replacement) .
2. Loosen and remove the I/P center trim panel from the I/P . Refer toInstrument Panel Center Trim Panel Replacement (Instrument Panel Center Trim Panel Replacement) .




3. Remove the screws that hold the I/P extension trim plate to the I/P.



Installation Procedure






Notice: Refer to Fastener Notice Service Precautions in Cautions and Notices.

1. Align and tighten the screws that hold the I/P extension trim plate with the I/P .

Tighten the screws to 2 Nm (18 lb in).

2. Align and fasten the I/P corner trim panel with the I/P. Refer toInstrument Panel Center Trim Panel Replacement (Instrument Panel Center Trim Panel Replacement) .
3. Align and move forward the center console into place and fasten to the center console bracket. Refer to Console Replacement (Console Replacement) .