A/T Gear Position Indicator Does Not Come On While The Shift Lever Is In That Position

A/T gear position indicator does not come on while the shift lever is in that position

F-CAN communication line error

Gauge control module defective

PCM defective

Transmission range switch defective

Shift cable broken or out of adjustment

Notes

Check the F-CAN communication line for a DTC F-CAN Circuit Troubleshooting.

Notes

Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function Testing and Inspection.

Notes

Inspect the transmission range switch Testing and Inspection.

Notes

Check for a loose shift cable at the shift lever and the selector control lever.