Advanced Diagnostics

Advanced Diagnostics - DTC U0301: PGM-FI System And A/T System Program Version Mismatch

General Description






The integrated motor assist-controller area network (IMA-CAN) uses two signal lines, IMACANH and IMACANL, and it receives and transmits multiple signals simultaneously to/from multiple control modules. When the software version in the powertrain control module (PCM) and the motor control module (MCM) are mismatched for a set time, the PCM detects a malfunction and stores a DTC.

Monitor Execution, Sequence, Duration, DTC Type, OBD Status






Enable Conditions






Malfunction Threshold
The software version in the PCM and the MCM are mismatched for at least 1 second.

Diagnosis Details

Conditions for setting the DTC
When a malfunction is detected, the MIL comes on and a Pending DTC, a Confirmed DTC, and the freeze data are stored in the PCM memory.

Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.