Transfer Breather Hose Replacement

Transfer Breather Hose Replacement

1. Disconnect the transfer breather hose (A) from the transfer breather box (B).






2. Remove the transfer breather hose from its clamp.






3. Raise the vehicle on a lift, and make sure it is supported securely.

4. Disconnect the transfer breather hose (A) from the breather pipe (B) on the transfer assembly.





5. Connect the transfer breather hose over the breather pipe with the dot mark (C) facing the rear of the vehicle, then install the hose on the clamp (D) at the dot mark (E).

6. Lower the vehicle.

7. Connect the transfer breather hose (A) to the transfer breather box (B).






8. Install the transfer breather hose (A) on its clamp (B) with the dot mark (C) facing the left of the vehicle.






9. Check that the transfer breather hose (A) is properly installed on the breather pipe on both sides.

NOTE: Make sure to install the transfer breather hose with the dot marks as shown.