Transfer Assembly Removal

Transfer Assembly Removal

1. Raise the vehicle on a lift, and make sure it is supported securely.

2. Move the shift lever to N.

3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF).





4. Reinstall the drain plug with a new sealing washer (B).

5. Remove the self-locking nuts (B).





6. Remove exhaust pipe A and the gasket (C).

7. Disconnect the breather hose (A) from the breather pipe (B) on the transfer assembly.






8. Make a reference mark (A) across the No. 1 propeller shaft (B) and the transfer companion flange (C), then remove the bolts (D). Separate the No. 1 propeller shaft from the transfer companion flange.






9. Remove the transfer assembly (A) and the dowel pin (B) from the transmission.






10. Remove the transfer breather hose bracket from the transfer assembly.