A/T Housing Intermediary Shaft Bearing Replacement

A/T Housing Intermediary Shaft Bearing Replacement

Special Tools Required

- Bearing Remover Shaft Set, 20 mm 07936-3710600
- Remover Handle 07936-3710100
- Slide Hammer 07936-371020A
- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 37 x 40 mm 07746-0010200

1. Remove the intermediary shaft bearing from the transmission housing using the 20 mm bearing remover shaft set, the remover handle, and the slide hammer.






2. Install the bearing until it bottoms out in the transmission housing using the driver handle and the 37 x 40 mm bearing driver attachment.