A/T Differential Carrier, Final Driven Gear, And Transfer Drive Gear Replacement

A/T Differential Carrier, Final Driven Gear, and Transfer Drive Gear Replacement

NOTE: Inspect and adjust the bearing preload whenever the carrier is replaced.

1. If necessary, remove the carrier bearings (A) A/T Differential Carrier Bearing Replacement.





2. Remove the final driven gear (B) and the transfer drive gear (C) from the differential carrier (D).

NOTE: The final driven gear bolts (E) have left-hand threads.

3. Replace the differential carrier or the final driven gear.

4. Install the final driven gear on the differential carrier in the direction shown.

5. Install the bolts through the differential carrier to the transfer drive gear.

6. Tighten the bolts to the specified torque in a crisscross pattern in at least two steps.

7. If you removed the carrier bearing for the differential carrier replaced, install the carrier bearings A/T Differential Carrier Bearing Replacement; replace it if it is damaged.