Clutch Pedal Position Switch B Test

Clutch Pedal Position Switch B Test

M/T model

1. Remove the driver's dashboard undercover Driver's Dashboard Undercover Removal / Installation.

2. Remove the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal / Installation.

3. Disconnect the clutch pedal position switch B 2P connector (A) from the clutch pedal position switch B.






4. Check for continuity between the terminals according to the table:

- If the continuity is not as specified, replace the clutch pedal position switch B Service and Repair and adjust the pedal height Adjustments.
- If OK, connect the clutch pedal position switch B 2P connector.





5. Install the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal / Installation.

6. Install the driver's dashboard undercover Driver's Dashboard Undercover Removal / Installation.