Clutch Pedal Position Switch A Test

Clutch Pedal Position Switch A Test

M/T model

1. Remove the driver's dashboard undercover Driver's Dashboard Undercover Removal / Installation.

2. Remove the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal / Installation.

3. Disconnect the 2P connector (A) from the clutch pedal position switch A.






4. Check for continuity between the terminals according to the table.

- If the continuity is not as specified, replace the clutch pedal position switch A Service and Repair, and adjust the pedal height Adjustments.
- If OK, connect the clutch pedal position switch A 2P connector.





5. Install the driver's dashboard lower cover Driver's Dashboard Lower Cover Removal / Installation.

6. Install the driver's dashboard undercover Driver's Dashboard Undercover Removal / Installation.