Remote Switch: Service and Repair

Audio Remote Switch Replacement

SRS components are located in this area. Review the SRS component location Locations, and the precautions and procedures Service and Repair in the SRS section before doing repairs or service.

With HandsFreeLink system

1. Remove the driver's airbag assembly Driver's Airbag Replacement.

2. Remove the screws (A) and lids (B) from the steering wheel (C).






3. Remove the screws (A) from the steering wheel.






4. Disconnect the connectors (A) (CVT model) and the connector (B), then remove the steering wheel trim (C).






5. Remove the screw, then remove the HFL switch or HFL-navigation voice control switch (A).






6. Remove the screws, then disconnect the connector (A) from the audio remote switch (B).






7. Install the audio remote switch in the reverse order of removal.

Without HandsFreeLink system

1. Remove the driver's airbag assembly Driver's Airbag Replacement.

2. Remove the screws (A) and the lid (B) from the steering wheel (C).






3. Remove the screws (A) from the steering wheel.






4. Disconnect the connectors (A) (CVT model) and the connector (B), then remove the steering wheel trim (C).






5. Remove the screws, then disconnect the connector (A) from the audio remote switch (B).






6. Install the audio remote switch in the reverse order of removal.