Excessive Idle Vibration In N And P (CVT)

Excessive idle vibration in N and P

Intermediate housing assembly worn or damaged

Input shaft worn or damaged

Flywheel drive plate worn or damaged

Flywheel assembly defective

Engine output low

IMA motor defective

Notes

Check the stall speed CVT Stall Speed Test (CVT).

Notes

Check the flywheel drive plate for wear and damage.

Notes

Inspect the flywheel assembly for wear and damage. If the flywheel assembly is worn or damaged, replace it as an assembly.

Notes

Inspect the input shaft assembly for wear and damage. If the input shaft is worn or damaged, replace it and also check the related part of the input shaft assembly for wear and damage.

Notes

Check the intermediate housing assembly for wear and damage. If the drive pulley, the driven pulley, the pulley shafts, the steel belt, or related part are worn or damaged, replace the intermediate housing assembly.