Fluid Filter - CVT: Service and Repair

CVTF Filter Replacement

1. Raise the vehicle on a lift, or apply the parking brake, block the rear wheels, and raise the front of the vehicle. Make sure it is securely supported.

2. Remove the splash shield (A) Splash Shield Replacement.






3. Remove the drain plug (A), and drain the CVTF.

NOTE:

- Remove metal particles from the magnetic surface of the drain plug.
- If a cooler cleaning is necessary, refer to the CVTF cooler cleaning CVTF Cooler Cleaning (CVT).





4. Reinstall the drain plug and a new sealing washer (B).

5. Disconnect the CVTF cooler hoses (A) from the CVTF filter (B).





6. Remove the bolt (C) and the CVTF filter bracket (D), then remove the CVTF filter.

7. Secure the new CVTF filter on holder bracket (E) with the CVTF filter holder and the bolt.

8. Slide the CVTF cooler hoses with the hose clips on the CVTF filter Service and Repair.

9. Refill the transmission with CVTF to the proper level.

10. Install the splash shield (A) Splash Shield Replacement.