Fuel Fill Pipe Cover Replacement

Fuel Fill Pipe Cover Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body or the related parts.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the left rear wheel.

2. Remove the clips, then remove the fuel fill pipe cover (A).

NOTE: To release the clip, pry up on the center pin at the notch (B).






3. Install the fuel fill pipe cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.

4. Reinstall the left rear wheel.