HandsFreeLink System Self-Diagnostic Function

HandsFreeLink System Self-Diagnostic Function

NOTE: This procedure should be used only if HDS is unavailable.

To run the self-diagnostic function, do the following:

- Turn the ignition switch to ON (II).

- Press and hold the HFL BACK button for more than 5 seconds.

- When the HandsFreeLink system enters the self-diagnostic function, the following will occur.

- If the system has not completed testing for DTC's, the HandsFreeLink system says "The hands free system test is in progress."
- If there is no DTC, the HandsFreeLink system says "The hands free system is OK."
- If there is any DTC, the HandsFreeLink system says "The hands free system needs to be serviced."
- The self-diagnostic function ends when the unit returns to idle state.

NOTE: The self-diagnostic function can only be initiated while the HFL is in an idle state.