Door Key Cylinder Switch Test

Door Key Cylinder Switch Test

1. Remove the driver's door panel Door Panel Removal / Installation.

2. Disconnect the 10P connector (A) from the door latch (B).





3. Check for continuity between the terminals.

- There should be continuity between terminals No. 7 and No. 10 when the door key cylinder switch is in the UNLOCK position.
- There should be no continuity between terminals No. 7 and No. 10 when the door key cylinder switch is in the neutral or LOCK position.
- There should be continuity between terminals No. 6 and No. 10 when the door key cylinder switch is in the LOCK position.
- There should be no continuity between terminals No. 6 and No. 10 when the door key cylinder switch is in the neutral or UNLOCK position.
- There should be no continuity between terminals No. 7 and No. 6 when the key is in the neutral position.

4. If the continuity is not as specified, the switch is faulty; replace the driver's door latch Service and Repair.