Advanced Diagnostics
Advanced Diagnostics - DTC P0780: Shift ErrorGeneral Description
DTC P0780 is stored when P1898 (CVT drive pulley pressure control valve stuck ON or CVT driven pulley pressure control valve stuck OFF), or P1899 (CVT drive pulley pressure control valve stuck OFF or CVT driven pulley pressure control valve stuck ON) codes is stored.
Monitor Execution, Sequence, Duration, DTC Type, OBD Status
Enable Conditions
Refer to the specific DTC information for P1898 or P1899.
Malfunction Threshold
Either P1898 or P1899 is stored.
Driving Pattern
Refer to the specific DTC information for P1898 or P1899.
Diagnosis Details
Conditions for setting the DTC
When a malfunction is detected during the first drive cycle, a Pending DTC is stored in the PCM memory. If the malfunction returns in the next (second) drive cycle, the MIL comes on and a Confirmed DTC and the freeze data are stored.
Conditions for clearing the DTC
The MIL is cleared if the malfunction does not return in three consecutive trips in which the diagnostic runs. The MIL, the Pending DTC, the Confirmed DTC, and the freeze data can be cleared with the scan tool Clear command or by disconnecting the battery.