A/T Housing Selector Control Shaft Bearing Replacement (A/T)

A/T Housing Selector Control Shaft Bearing Replacement

Special Tools Required

- Bearing Remover, 10 mm 07936-GE0A000
- Slide Hammer 07936-371020A
- Driver Handle, 15 x 135L 07749-0010000
- Attachment, 22 x 24 mm 07746-001A800

1. Remove the control shaft bearing from the transmission housing using the 10 mm bearing remover head, the 10 mm bearing remover shaft, and the slide hammer.






2. Install the bearing until it bottoms out in the transmission housing using the driver handle and the 22 x 24 mm attachment.