Rear Suspension Lower Cover Replacement

Rear Suspension Lower Cover Replacement

NOTE:

- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the screw and the clip, detach the hook (A), then remove the rear suspension lower cover (B).

NOTE: To release the clip, pry up on the center pin at the notch (C).





2. Install the cover in the reverse order of removal, and note these items:

- If the clip is damaged or stress-whitened, replace it with a new one.
- Push the hook portions into place securely.