Dashboard Side Panel Removal/Installation

Dashboard Side Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service and Repair before doing repairs or service.

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- The passenger's dashboard side panel is shown; the driver's dashboard side panel is similar.

1. Remove the passenger's dashboard side panel (A).

1. Pull out the door opening seal (B) as needed.

2. Gently pry the rear edge of the panel with the appropriate trim tool to detach the hooks (C).





2. Install the panel in the reverse order of removal, and push the hooks into place securely.