Dashboard Center Pocket Removal/Installation

Dashboard Center Pocket Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Honda Tool and Equipment Program, 888-424-6857

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the humidity/in-car temperature sensor trim Humidity/In-Car Temperature Sensor Trim Removal/Installation.

2. Remove the center pocket (A).

1. Remove the screws.

2. Pull out the center pocket slightly toward you, and detach the clips (B, C).





3. Install the center pocket in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.