Radiator And A/C Condenser Fan, Motor, And Shroud Removal And Installation

Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation

Removal

1. Do the battery removal procedure Removal and Replacement.

2. Remove the battery base.

3. Remove the front grille cover Front Grille Cover Replacement.

4. Remove the splash separator.

5. Raise the vehicle on the lift.

6. Remove the engine undercover.

7. Disconnect the A/C condenser fan motor connector (A), and remove the harness clamp (B).





8. Loosen the A/C condenser fan shroud mounting bolts (C).

9. Disconnect the radiator fan motor connector (A).






10. Lower the vehicle on the lift.

11. Remove the coolant reservoir.






12. Remove the upper brackets (A).





13. Remove the A/C condenser fan shroud assembly (B), then remove the radiator fan shroud assembly (C).

NOTE: Pull-up the radiator, then move the radiator fan shroud assembly toward the right side of the vehicle to allow for enough space to lift it up and away from the A/C condenser fan shroud assembly.

14. Disassemble the fan shrouds.






Installation

1. Assemble the fan shrouds.






2. Install the radiator fan shroud assembly (A), then install the A/C condenser fan shroud assembly (B).





3. Install the upper brackets (C).

4. Install the coolant reservoir.





5. Raise the vehicle on the lift.

6. Connector the radiator fan motor connector (A).






7. Tighten the A/C condenser fan shroud mounting bolts (A).





8. Connect the A/C condenser fan motor connector (B), and install the harness clamp (C).

9. Install the engine undercover.

10. Lower the vehicle on the lift.

11. Install the splash separator.

12. Install the front grille cover Front Grille Cover Replacement.

13. Install the battery base.

14. Do the battery installation procedure Removal and Replacement.