Transmission Mount: Service and Repair

Transmission Mount Replacement

1. Loosen the upper torque rod mounting bolt (A).





2. Remove the air cleaner Service and Repair.

3. Remove the ECM/PCM cover, then remove the three bolts securing the ECM/PCM.

4. Remove the ECM/PCM bracket.

5. Remove the under-hood fuse/relay box from the bracket.

6. Raise the vehicle on the lift.

7. Loosen the lower torque rod mounting bolt (A).





8. Lower the vehicle on the lift.

9. Lift and support the engine with a jack and a wood block under the transmission.

10. Remove the transmission mount stiffener (A), then remove the transmission mount (B).

M/T model





A/T model





11. Install the transmission mount, and tighten the new transmission mount mounting bolts (C), then install the transmission mount stiffener.

12. Loosely install the new transmission mount bracket mounting bolt and nuts (D).

13. Remove the jack and the wood block.

14. Tighten the transmission mount bracket mounting bolt and nuts.

M/T model





A/T model





15. Raise the vehicle on the lift.

16. Tighten the lower torque rod mounting bolt.





17. Lower the vehicle on the lift.

18. Tighten the upper torque rod mounting bolt.





19. Install the under-hood fuse/relay box to the bracket.

20. Install the ECM/PCM bracket.

21. Install the ECM/PCM, then install the ECM/PCM cover.

22. Install the air cleaner Service and Repair.