Side Engine Mount Replacement

Side Engine Mount Replacement

1. Remove the bolt (A) securing the A/C line, then remove the upper torque rod (B).

M/T model





A/T model





2. Lift and support the engine with a jack and a wood block under the oil pan.

3. Remove the ground cable (A), then remove the side engine mount bracket (B).






4. Remove the side engine mount stiffener (A), then remove the side engine mount (B).





5. Install the side engine mount, then install the side engine mount stiffener.

6. Install the side engine mount bracket (A), loosely install the new bolt and nut (B), and loosely install the bolt (C).





7. Install the ground cable (D).

8. Remove the air cleaner Service and Repair.

9. Loosen the transmission mount bracket mounting bolt and nuts (A).

M/T model





A/T model





10. Remove the jack and the wood block.

11. Raise the vehicle on the lift.

12. Loosen the lower torque rod mounting bolt (A).





13. Lower the vehicle on the lift.

14. Tighten the side engine mount bracket mounting bolts and nut.






15. Tighten the transmission mounting bolt and nuts.

M/T model





A/T model





16. Raise the vehicle on the lift.

17. Tighten the lower torque rod mounting bolt.





18. Lower the vehicle on the lift.

19. Install the air cleaner Service and Repair.

20. Install the upper torque rod (A), then tighten the new upper torque rod mounting bolts in the numbered sequence shown.

M/T model





A/T model





21. Install the bolt (B) securing the A/C line.