Fuel Receptacle Check

Fuel Receptacle Check

Special Tools Required

- CNG Fill Receptacle Gauge RINGGO-0001, commercially available
*Available through the American Honda Tool and Equipment Program; call 888-424-6857

1. Open the fuel fill door, and remove the dust cap from the fuel receptacle.

2. Clean off any dirt or debris around the fuel receptacle.

3. Slide the ring gauge (T/N RINGGO0001) over the fuel receptacle.

- If the ring gauge slides easily past the first lip on the fuel receptacle, the receptacle is OK.
- If the ring gauge does not easily slide past over the first lip on the receptacle, replace the receptacle Service and Repair.

OK





NO GOOD